Quick view Primary Capacitor PCB for Reference Design 1.0 Tesla Coil MSRP: Was: Now: $53.99 Add to Cart
Quick view Power Bridge Assembly for Reference Design 1.0 Tesla Coil MSRP: Was: Now: $659.99 - $759.99 Choose Options
Quick view Primary Capacitor PCB for Reference Design 1.0 Tesla Coil High performance PCB carrier for the Reference Design 1.0 DRSSTC primary capacitor which holds (8) 940C20P47K-F 0.47uF, 2kV capacitors. The PCB board features very rigid 0.124" thick FR-4 board with an equivalent 8 oz. copper for high current... MSRP: Was: Now: $53.99 Add to Cart
Quick view CM300DY-12NF Half-Bridge Assembly A complete CM300DY-12NF half-bridge assembly designed for mid-power DRSSTC Tesla coils. When powered with 115VAC 50/60Hz, the DC bus voltage across the half-bridge is 340VDC and can when driving a properly designed Tesla coil, can produce over 6... MSRP: Was: Now: $659.99 - $759.99 Choose Options
Quick view Power Bridge Assembly for Reference Design 1.0 Tesla Coil A complete power bridge assembly for use in our Reference Design 1.0 DRSSTC Tesla coil system. When powered with 115VAC 50/60Hz, this CM300DY-12NF half-bridge based power bridge can drive a Tesla coil producing well over 6 feet of output... MSRP: Was: Now: $659.99 - $759.99 Choose Options
Quick view Resistor 20k/5W Bleeder Resistor 20k, 5W Bleeder These resistors are used across the DC bus capacitors in the Reference Design 1.0 DRSSTC system. With a 340VDC initial charge across the double stack of capacitors (170VDC per capacitor), the safety bleed time to less than... MSRP: Was: Now: $3.99 Add to Cart
Quick view Magnet Wire, 22 AWG, 125 Feet Magnet Wire, 22 AWG, 125 Feet Enamel: Double build, 200degC This is replacement magnet wire for use in our Class-E Plasma Speaker kit. Note: Photo is a generic sized spool of magnet wire. Actual spool size will vary according to total... MSRP: Was: Now: $19.99 Add to Cart
Quick view Magnet Wire, 30 AWG, 785 Feet Magnet Wire, 30 AWG, 785 Feet Enamel: Double build, 200degC This wire is perfect for low frequency secondary coils for use in SSTCs, DRSSTCs, or spark gap Tesla coils. This is the magnet wire that is included with the SSTC 1.0 and microBrute DRSSTC... MSRP: Was: Now: $19.99 Add to Cart
Quick view Magnet Wire, 30 AWG, 1570 Feet Magnet Wire, 30 AWG, 1570 Feet Enamel: Double build, 200degC This wire is perfect for low frequency secondary coils for use in DRSSTC or spark gap Tesla coils. This is the magnet wire that is included with the miniBrute DRSSTC Tesla coil kit. MSRP: Was: Now: $29.99 Add to Cart
Quick view Magnet Wire, 30 AWG, 2750 Feet Magnet Wire, 30 AWG, 2750 Feet Enamel: Double build, 200degC This wire is perfect for low frequency secondary coils for use in DRSSTC or spark gap Tesla coils. MSRP: Was: Now: $35.00 Add to Cart
Quick view Socket, Bayonet Base BA-15S Socket Bayonet Base, BA-15S Fits BA-15S bayonet base type bulbs. This is the base that fits the 18-SMD LED bulb we sell for our Human Conductivity or Body Light 1.0 kit. MSRP: Was: Now: $2.99 Add to Cart
Quick view LED 18-SMD White, 12V LED 18-SMD White, 12V This is the LED used for our Human Conductivity or Body Light 1.0 kit. Use this in conjunction with the BA-15S socket we also sell. MSRP: Was: Now: $9.99 - $12.99 Choose Options
Quick view Resistor 10Meg/0.5W Bleeder Resistor 10Meg / 0.5W Bleeder These resistors are used for safety bleeder resistors across your 942C or 940C capacitors in your primary MMC capacitor arrays. Available as a single or in sets of 10. MSRP: Was: Now: $0.25 - $2.00 Choose Options
Quick view Resistor 5.1/0.5W Resistor 5.1 ohm / 0.5W These 5.1 ohm resistors are used for gate drive circuits. Use them in series between your gate driver IC and your gate on your MOSFET or IGBT. These are used in all of our IGBT gate drive boards. MSRP: Was: Now: $0.20 Add to Cart
