Main Logo
 
For Schools
Plasma Speaker
Design

 

 
Clear Pixel

flexiBrute 1.0 MIDI DRSSTC Interface

 

(Please note that the popping noises in the video are due to a microphone issue only.)

The flexiBrute 1.0 MIDI Interface is an advanced musical driver designed for both conventional Solid State Tesla Coils (SSTCs) as well as Double Resonant Solid State Tesla Coils (DRSSTCs).  The interface is a complete solution designed to convert your SSTC or DRSSTC into a musical instrument by allowing one to directly connect any MIDI type instrument, such as a keyboard or synthesizer, directly to the input of their coil and play music through it. The advanced microcontroller controlled interface allows the playing of both single (monophonic) and multiple (polyphonic) notes through your Tesla Coil.  The flexiBrute 1.0 MIDI interface can be user configured through the use of onboard switches and potentiometers and can be custom programmed to operate with Tesla Coils of all sizes, from lower SOT-227 half-bridge coils to high power CM600 full-bridge based Tesla Coils.  Onboard LED indicators continuously provide the user with operational feedback to the status of the controller and alert the user if any faults have occurred.

With ease and simplicity in mind, our kits are specifically designed to use thru-hole components which allows for quick and easy soldering.  Also, our kits have all connectors and user controls mounted directly to the board (with the option of externally mounting them if desired) which gives a very neat and professional appearance.

The flexiBrute 1.0 MIDI Interface is compatible with both our microBrute and miniBrute line of DRSSTCs!

DRSSTC MIDI  Interface Board DRSSTC MIDI  Interface Board DRSSTC MIDI  Interface Board DRSSTC MIDI  Interface Board
DRSSTC MIDI  Interface Board DRSSTC MIDI  Interface Board    

Click here for the flexiBrute 1.0 MIDI Interface Datasheet (PDF) - Available now

Click here for the flexiBrute 1.0 MIDI Interface Instruction Manua REV A - Available now

Features:

 

- Onboard MIDI Input Connector (5-Pin DIN)
- Optically Isolated Input
- Maximum Pulsewidth Protection through independent discrete circuitry
- RCA and BNC Output Connectors
- Fiber Optic Output Connector (ST)
- Pulsewidth Mode - User Selectable
- Pulsewidth Length - User Programmable
- Maximum Frequency Range - User Programmable
- Monophonic and Polyphonic Playback Available
- Multiple MIDI channels available

$69.99

flexiBrute 1.0 MIDI Interface Board - RCA Output Connector
MONOPHONIC Version
Includes Printed Circuit Board with Components
(Power Supply not included)

 

 

 

 

$71.99

flexiBrute 1.0 MIDI Interface Board - BNC Output Connector
MONOPHONIC Version
Includes Printed Circuit Board with Components
(Power Supply not included)

 

 

 

 

$85.99

flexiBrute 1.0 MIDI Interface Board - Fiber Optic Output
MONOPHONIC Version
Includes Printed Circuit Board with Components
(Power Supply not included)

 

 

   

$90.99

flexiBrute 1.0 MIDI Interface Board - DELUXE
Deluxe version includes RCA, BNC, and Fiber Optic Output Connectors
MONOPHONIC Version
Includes Printed Circuit Board with Components
(Power Supply not included)

 

 

 

 
 
 
 
 
 
 
 

 

 

$0.00

Alternate MIDI Channel Programming
The default MIDI Interface is set for MIDI Channel 1. We can custom program your MIDI interface for channels 2 and 3 if required. Choose this option for custom programming and select the alternate MIDI Channel.

MIDI Channel

 

 

 

$29.99

flexiBrute 1.0 MIDI Interface - Replacement Microcontroller
Please select MIDI Channel 1, 2, or 3.
Please note, if you have already purchased one of our MIDI Interface Kits, the replacement print is only $19.99 per microcontroller.

MIDI Channel
 

 

 
 
 
 
 
 
 

Click here for accessory ordering page