Our ready-made Tesla Coil assemblies are the perfect start for your next Tesla Coil project. These assemblies are specifically designed for those wanting to simply concentrate on the electronics and making sparks and arcs, without having to go into the shop to create a nice base and support structure, or investing in a lot of expensive woodworking or machining tools.
These Tesla Coil assemblies utilize very high quality solid wood (not plywood) and 0.5" thick impact and shatter resistant polycarbonate which are both CNC and hand machined here in the United States by our craftsmen to bring you the finest product possible.
The DRSSTC Tesla Coil Assembly 2.0 is our MOST popular DRSSTC assembly option. This is a proven design using a low-coupling pancake primary coil configuration that is perfect when utilized with CM300 / CM600 high power IGBT bricks. Well tuned coils driven with a single CM300 IGBT brick using this configuration can achieve five (5) foot arcs with only 120VAC input. It can also be used for spark gap coils and lower power DRSSTCs using TO-247 and SOT-227 based IGBTs.
This kit includes a CNC machined base available in both premium wood panel as well as clear polycarbonate. It features a pancake type primary coil using 0.25" DIA copper tubing mounted on 0.5" polycarbonate supports and a 0.375" DIA copper primary strike rail which is used to protect the primary from secondary arc strikes. It is designed to be used with secondary coilforms up to 4.5" in diameter.
We can also provided complete customization for these bases. (Please note that the coilform shown in the photos is not included.)
(Please note that due to the machining operation, there may be some imperfections in the surface of the polycarbonate. Additional shipping charges may apply due to the weight of these assemblies.)
Click here for the DRSSTC Tesla Coil Assembly 2.0 Datasheet (PDF) - Coming soon
- CNC machined top and base structures with recessed feature mounting surfaces (16" x 16") - Available in wood and polycarbonate
- 1 1/8" DIA Stand-offs with high strength threaded inserts - Available in wood and polycarbonate
- Large, 1.5" DIA rubber feet bumpers
- Primary and strike rail supports are made with 0.5" thick clear polycarbonate
- Supports secondary coilforms up to 6 inches in diameter
- Primary Coil - 8 Turns, 0.25" copper tubing, 0.25" spacing, 5.75" inner DIA, pancake winding configuration
- Primary Inductance - 0 to 18.3uH max.
- Primary Strike Rail - 1 Turn, 0.375" copper tubing, 15.5" DIA
- Hardware included as shown
- Ready to stain (wood version)
DRSSTC Tesla Coil 2.0 - Base Assembly
Includes base, stand-offs, rubber feet, primary / strike rail supports, decal, and hardware
Available with both solid wood or polycarbonate bases
(Copper tubing not included)
User must drill / tap
DRSSTC Tesla Coil 2.0 - Primary Supports Only
Includes polycarbonate primary / strike rail supports
This is a perfect kit if you have your own base and just want a set of professionally machined primary supports.
(Copper tubing not included)
These are available either fully machined or provided with a template so that the end user can drill and tap their own mounting holes.
DRSSTC Tesla Coil 2.0 - Complete Assembly
Includes base, stand-offs, rubber feet, primary / strike rail supports, decal, hardware, and 1/4" and 3/8" copper tubing for the primary coil and strike rail
Copper tubing, 1/4" DIA, 25 feet length
This is the proper length for 8 turns of the primary of this assembly
Copper tubing, 3/8" DIA, 5 feet length
This is used for the strike rail of this assembly
18" x 4.5" Aluminum Toroid - Most popular toroid option for this DRSSTC assembly
Mounting hole for 1/4" hardware
Welded and seamless - These are BEAUTIFUL!!!
18" DIA x 4.5" Height